Polyester Men Blank Apparel

So, I read all the reviews for this product in hopes to find out if these shirts run small or big and was surprised that no one had commented about that! So, I was the lucky one to buy one in every size pretty much. I even measured myself to find the proper size. The small is SMALL... I am a size 8-10 typically a medium in shirts and the large fits me great. I wouldn't say that this shirt is really a "unisex" considering the large fits me perfectly. These shirts are extremely soft and very easy to wash! I would definitely recommend this shirt... just be aware of the sizing. Nice stretch to the shirt, too. I would say if you are a female size 0 to 4 then the small would fit you. Size 6 to 8 would be a medium and size 10 to 12 large. Hope this helps whoever in their purchase of these awesome shirts!!!!

Okay so I bought a sublimation printer before reading all the good stuff you should know. Actually, my husband bought it, therefore that should not be held against me. Anyway...turns out you need to use 100% polyester shirts to get really vibrant prints. WHAT?? How am I going to convince my customers to wear granny's poly?? I am not going to make a penny with this stuff. So the shirts came in. Oh. My. Gosh. I am in absolute LOVE (don't tell my husband). These shirts are softer than a bunny's... uh... foot. They are a wee on the thin side, but heck, everyone is showing skin anyway and they sure aren't that bad. This is seriously my new favorite shirt. I will go broke on these shirts. I keep telling myself to sell these shirts, but my closet is getting fuller and fuller. LOVE these shirts! Wait. No. Don't buy them. If y'all buy them, they may run out and I just can't have that. Great shirt, seriously.

These shirts are great for sublimation! I use these almost daily for my customers. They run true to size and don’t peel.

These tees are sooooo perfect for sublimation. They aren’t silky like a drifit tee, but super soft and cotton feely. I DEFIANTLY recommend this brand of tee if you want a bright image printed

great for sublimation

Soft, true to size, bleaches and sublimates great. I do not use any sprays! The pitch black mist bleaches beautifully-no orange!

Sizing. Needs to be in measurements so the label size can be ignored. I have 36 inch arms, 6 foot 2 inches tall, a 34 inch waist and weigh. 185 lbs Ordered 2XL for sleeve length. Big enough for two of me. Sleeves were good. Sent back, no problem. Ordered XL, better but not quite . Kept these and ordered LARGE. Received these and PERFECT! ! ACTUAL measurements should be included in description to avoid this.Love the shirts, lite, airy, looks good etc. The lower arms get sunburned easily and need to be protected, the long arms do this well.

This is by far my FAVORITE tee. It’s so so soft, and wears so well, takes HTV and Sublimations SO well!

I just started sublimation and used this shirt. It was very soft and comparable to cotton.

I purchased the white A4 performance shirt to make jerseys for a friend who is a coach of a basketball team. They were on a limited budget and I offered to take a shot at making them some. These shirts were exactly what we needed. They took the Siser HTV well at 290 degrees with no burn marks. The shirts have held up well and look great.

I bought these shirts for my husband's work softball league. I put htv on them and they held up pretty well! They love the fit and they're very soft.

I bought these shirts for a group that was running the Spartan Race. Overall I loved the quality and feel of the shirts. Iheat pressed them with heat transfer vinyl and it took wonderfully, I however had to press the entire shirt as the heat discolored it where I pressed so it created a litttle bit more work.

I made these shirts for a basketball team that I sponsored this year and they are perfect for their shooting shirts. I used the silver color and was able to sublimate on them very easily.

I used these shirts for my sons basketball teams warm up shirts. I used Thermoflex plus HTV at 325 for 15 seconds which worked well with the polyester fabric. . I took the carrier sheet off and pressed again for another 15 seconds. I had a very slight heat press mark but that seemed to disappear once washed. I found the shirts to run a bit big so I just sized down one for each player.

We owe a print shop and these shirts are the best to work with either with sublimation or heat transfer. We are happy with them as are the customers. Very durable comfortable.

I have been printing on gildan softstyle shirts for many years, but have recently decided to try and support american made products. This is a great tshirt. Very soft and lightweight, and feels a touch better in quality than the gildan shirts, but a pretty comparable shirt. Although it costs a few bucks more, I like knowing that my purchase is supporting american jobs.

I ordered these shirts for a contractor customer. We applied his logo and he distributed the shirts among his crew. A few days after he picked up the shirts he stopped by to tell me that his crew members love the shirts. They are working all day outside and the shirts keep them nice and cool, they pull the sweat away from their skin and don't cling, No ugly sweat stains and very easy to get the dirt out during wash. A winner on all fronts!

I did HTV on these long-sleeve shirts for a high school basketball team. They loved how they looked and how they feel as well. Great shirt.

I used this shirt for sublimation, and it looked great, however, it was a little thin. I have to wear an under shirt underneath it.

Easy to use. Takes sublimation great.