Wholesale Blank T-Shirts In Royal

My customers love these!
I print using dye sublimation which requires 100% polyester for the best print. Polyester shirts come in two finishes and when my customers want the feel of cotton shirts, these are perfect!
I have not had a single complaint from a customer with these. And happy customers are what it's all about.

I love this shirt so much that I ordered more to wear for myself. The Triblend's are super soft and comfortable. The plain non-triblends are just as great. I can't wait to start heat pressing on these to add a new style to my shop. I love these MUCH more than the other cheaper bella Vnecks. These are not form fitting and run true to size (Maybe even a bit bigger, I I'm 170 lbs and normally wear an XL in bella, but I wear a Large COMFORTABLY- i could easily go down to a Medium) thanks! I hope this helps!

I love the fit of this shirt. It's still feminine cut and allows more room for the full figure woman. More room than the regular Bella shirts.

True fit- comfy and cute, not super tight like some other women’s cut run. I’m very curvy and large chested and this fits nicely. Pic is shirt laying on a unisex, for cut comparison.

These are great baby onesies, nice weight, not flimsy, soft cotton and they work with heat transfers well.

OMGOODNESS! This was my 1st sub product of this magnitude and it turned out amazing. I have to remember to size down one size for the ladies next time, but other then that is was a hit.

I bought these to sublimate on. Every color fits just a tad bigger, but I would not size down if you like a loose fit. The athletic gray and light blue subs extremely well. I would not recommend subbing on the red, charcoal and California blue. The heat is too high for them and they tend to scorch. I turned the heat temp. down and it still scorched them and the image was faded.

This shirt is more true to size than typical "ladies cut" shirts, although I felt they were a little shorter than a typical t-shirt. They weren't super snug through the waist, but still showed a little of the feminine form. If you are not a super slim woman, but still want something flattering, this was nice. The sleeves were a little longer than most ladies cut shirts as well.

My choice of baby onesies !!! Wish they had more sizes ! Such as 0-3, 6-9 ... but in my opinion the newborn fits a newborn and can be used as 0-3 . My almost three month old which is 14lbs can still wear his newborns, but he could also wear them as a newborn too . But I still love these onesies!

I use these tee's for HTV and they work perfectly and look fantastic. The softness and quality of the tee combined really can't be matched. I also found that the Bella Canvas 3001c is very comparable to these and a few dollars less.

I keep nudging female customers toward this style - especially those who are petite and can’t do the length of unisex shirts. It is a little wider at the hem than it is at the underarm width - perfect for hips and curves! It is also more proportional at the sleeves. Soft and takes htv flawlessly! Washes up beautifully!

Love the fit of this. Shorter than unisex, but same quality! True to size, but I sized up for a looser fit!

I am a larger woman and the shirts are very comfortable and cling to all the right places. I ordered mine for rhinestone iron ons. My rhinestone iron ons worked out great and they have been washed and still stick to the shirt. I will be ordering the shirt in every color.

This is by far my FAVORITE tee. It’s so so soft, and wears so well, takes HTV and Sublimations SO well!

These are great! Sizing I feel go as follows: NB=0-3 months 6mon=3-6 months 12mon=9-12 months And so on!

These Bella canvas shirts are the best!!! My favorite to use when adding sublimation and HTV. They are a customer favorite as well!

These tees are amazingly soft and comfortable. My only complaint is how thin they are, so make sure you don't size down unless you like to layer. I also say the sizing runs very similar to US women's sizing vs Unisex. There's no way my husband would be able to wear his normal size in this.

I use these with my heat transfer designs. They are a great quality which makes the price for them even better. I have found anything cheaper than these. They do run a bit big though. I would say a newborn size is more like a 0-3 month and the 18 month was huge (looked as wide as 2T shirts and really long). They are really stretchy too so I usually get a size smaller than what is normally worn. The material is really soft and I love the color selection. The pictures are very close to actual color but don't really do them justice.

I love these shirts for sublimation. The fabric accepts the dye well and colors turn out well. I prefer a thinner softer tee and these fit the bill.

I purchased these shirts to make matching Disney shirts for our Mother-Daughter trip to Disney World. I absolutely loved them! They were comfortable and fit great! I loved how soft they were. They also took the glitter vinyl very nicely! I will be purchasing many more shirts from Jiffy! I did have to return my daughter's shirts as she wears a small not medium and I had purchased them in medium. Jiffy immediately exchanged them in plenty of time. I am thrilled with the customer service I experienced with Jiffy!