Gorras

These can holders take htv vinyl great!

I personalize these with HTV, it presses on great at a regular shirt setting. People always love them!

Great material! Well made! Easy to add HTV :)

I had kind of a hard time getting heat transfer vinyl to stick to this (it liked to slide) so not sure if it was the material of the holder or the vinyl. but very well made and were still a hit!

I purchased these transfers for a customer that wanted to add branding to his HI VIS shirts. His logo is color rich with a lot of detail and our initial thought was to order in black with the reflective overlay. When I went to upload, I noticed that color prints were an option so I decided to give it a shot. Was it reflective? Yes! Was it in color? Well, sort of. The overlay of the reflective film cast a haze over the color that it basically muted it to the point that having color at all seemed pointless. The areas of black on the logo looked amazing though! This was absolutely NOT a Jiffy problem, it was a first time attempt at using a method I was unfamiliar with. Going forward, I will use black and white only. As for the quality -- this entire order (source issue, maybe) was pretty terrible. I have filed a claim with Jiffy regarding many many issues with other transfers that were part of this same order and I am waiting to hear a resolution on that. Of the $300 worth of transfers I ordered as part of this transaction, I have requested a refund for $261.00 of them. While this specific product is not part of that claim, it could have been based on the photos of the poor adhesion. The photo with the poor adhesion was the last of several shirts that I pressed with this transfer and the rest of them were fine. I hope to order again -- I have been happy with Jiffy up to this point -- but the quality of the one reflective transfer and the 60+ other non-reflective transfers is problematic and a lot will depend on their response. $300 is a lot of money for a small business that has to rebuy transfers and ruined shirts.

Just what I needed! Material is great and took HTV really well (just change your settings for this type of material or it won’t do right) but that’s with any kind of material.

So the film was a little difficult to peel off the image once it was pressed. I followed the instructions given by JIFFY....BUT I will definitely be trying it again😁

Used on socks, best quality I've had for DTF transfers

These are harder to peel off the shirts. I let them sit over night and they peel right off the next day. If you try after it cools or when it’s warm it seems stuck. But give it a few hours or overnight and they peel off a lot better

Used to apply htv and worked perfectly!

The colored reflective transfers are probably my favorite transfer from Jiffy. They peel easily, even when there's fine detail and even with very small images. The color shows up with nice contrast although a bit muted as you can see with the panda (last picture is the uploaded red panda image for comparison). White transfers very well as you can see in the armadillo. The Hedgehog image was black but comes out dark gray on the reflective transfer. On 100% polyester athletic wear, I place a cut out of cardboard of matching size behind the image to raise it a bit because the high temperatures often create a permanent impress in the fabric, and I don't want the rectangle outline of my heat press to be permanent. I use a pressing pad with a Teflon cover and double check my heat press temperature with a laser thermometer.

I had no idea you could get reflective DTF prints in full color. I thought it was just grayish, but they look so cool and work great

I have ordered reflective before and I was frustrated with it. This last time I ordered it. It was so much better. I love how jiffy is always looking for ways to improve their products.

Color prints off pretty close to the ProColor and it glows in the dark! I was little skeptical when I tested the glow while it was still on the transfer sheet. But once adhered to the shirt the glow was beautiful!

This will be my 3rd glow in the dark order, over 100 prints, and i have yet to have any issues with the prints. they adhere to the fabric well, and the glow under a black light is bright. the glow lasts about 1-2 min with the blacklight.

I couldn’t have done it any better in-house. I had to outsource Jiffy to complete this graphic!! Uploading more. They kept promise of next day which is what I need a dependable quality printer!

Used on a few 100% polyester shirts and they came out awesome. Was harder to transfer but once you get the hang of it no problem.

The quality of this product!!!! Man I loved this material and it was so easy to use

I love the reflective option. It's perfect for running before daylight.

Easy to use, some good pressure needed