Custom T-Shirts

Okay so I bought a sublimation printer before reading all the good stuff you should know. Actually, my husband bought it, therefore that should not be held against me. Anyway...turns out you need to use 100% polyester shirts to get really vibrant prints. WHAT?? How am I going to convince my customers to wear granny's poly?? I am not going to make a penny with this stuff. So the shirts came in. Oh. My. Gosh. I am in absolute LOVE (don't tell my husband). These shirts are softer than a bunny's... uh... foot. They are a wee on the thin side, but heck, everyone is showing skin anyway and they sure aren't that bad. This is seriously my new favorite shirt. I will go broke on these shirts. I keep telling myself to sell these shirts, but my closet is getting fuller and fuller. LOVE these shirts! Wait. No. Don't buy them. If y'all buy them, they may run out and I just can't have that. Great shirt, seriously.

I order a handful of these tees atleast once a week. They are my go to brand to order for the sublimation process. Great fit, little to no shrinkage. So many colors to choose from as well, although the lighter the colors... the better the sublimation print will show up! ;)

I ordered these shirts to heat press HTV on them to give as gifts. These shirts are SO soft. They hold up well in the wash and the quality is great. I'll order these again and again!

These have a unisex fit, similar to a traditional men's shirt. For a fitted look, I recommend ordering a size down!

XS (0-4)
Small (4-6)
Medium (6-10)
Large (10-14)
XL (14-18)

Love love love these shirts. They are SO SOFT and I love the heathered colors. Here's a size chart for everyone... XS = 4/5 S = 6/7 M = 8 L = 10/12 XL = 14/16 These run slim and long but take HTV VERY well.

I used these shirts for sublimation and vinyl.

My customers love these!
I print using dye sublimation which requires 100% polyester for the best print. Polyester shirts come in two finishes and when my customers want the feel of cotton shirts, these are perfect!
I have not had a single complaint from a customer with these. And happy customers are what it's all about.

This is my favorite brand of shirt to use for heat press transfers. I always go to this brand first. Not only is the cut good, but the material holds up wash after wash and also takes the transfers really well. I highly recommend this brand

The only thing I wish they would post is a size chart! I have had to figure it out on my own! XS fits a 6 generously S fits a 8 the same way M = 10 L = 12 XL = 14 This is just what we have figured out and go off of, the shirts are very soft, comfortable, don't shrink up! They take HTV great! Some times other brands are harder to press, not this one!

Love these for HTV! Made some mama bear ones and they are a huge hit!

I'm a big gal and these shirts actually fit well... wash well, too... love the colors too<br />

Alright this will be a long review but extremely helpful here we go. First off I bought the white, Light gray, cardinal, cool blue, black, graphic black, and military green all of these did match the pictures except light gray that one was a lot lighter it looks more like your t shirt is dirty in my opinion. And the graphic black looks more like a really dark gray didn't care for that one either. Ok softness nice and soft love it. fit was perfect. shrinkage they hardly if any shrunk at all. They also hold up well with vinyl on them. Ok now I'm going to compare them to the shirts I previously bought. HANES 5170 compared to Next level 3600- Next level 3600 are by far better they are way softer and shape is way nicer. Gildan G640 compared to Next level 3600- the softness is the same, the thickness Gildan is a bit thicker, the shape they are the same, the colors are fairly the same. The reason I chose next level though is because Gildan was shrinking a lot I'm talking a good 1 1/2 - 2 inches of shrinkage, but my sister likes Gildan better and says hers don't shrink IDK. Lastly Next level 3600 compared to Bella canvas 3001 CVC- I love them both softness the same, shrinkage the same they hardly shrink, the only difference is fit I buy the next level for men they are more loose fitting I buy the bella's for women they are more fitted so they are tighter on men but loose enough on women. I hope this helps someone.

I ordered these just for personal use. I just wanted some plain t-shirts in different colors that were inexpensive, but comfortable and flattering. These work perfectly. I wear one of them almost every day around the house, with my pajama pants or yoga pants. They also are great for wearing under hoodies in this cold weather that we are currently having. I would also wear them with a pair of jeans, running errands, etc. They are very comfortable and soft and I'm very happy with this purchase! The sizing on the unisex shirts is not as small as the women's style, so I could wear a medium in this, and it fits perfectly. It is not oversized or loose, but it is not too tight either. I am 5'6" and approximately 130 lb. If you're large chested, which I'm not, then you'd want to probably size up a little bit. I think I could go with a large, if I wanted a little more of a loose fit. And I may try large next time. I would say a man would probably want to order a size up, unless you like the fitted look. I haven't noticed any shrinking, which is awesome! I do put them in the dryer, but on low heat, and they come out well! 👍🏼

These shirts are great for sublimation! I use these almost daily for my customers. They run true to size and don’t peel.

These are my favorite shirts to use for kids! They hold up great and are so soft and comfortable. I do usually size up though. XS-4-5, S-6-7,M-8,L-9-10,XL-12-14

Love these for sublimation! I normally use the bella + canvas marble ones and while those are softer these are still great quality! They are not as see through and they hold the sublimation wonderfully! My customers loved them, will be buying again!

These are the best T-Shirts ever. I order them for customers who want them embroidered. I have never had a complaint -- in fact, my customers will always tell me to order the ones just like they got before. They are a great weight and are extremely comfortable. I always order from Jiffy because they have good prices, great service, and reasonable shipping costs.

We Tie-Dye for the Disney Marching Bands, the Patch Adams clowns, Disney ESPN Sports Teams, as well as sell on Etsy, Ebay and Amazon. We buy from Jiffy in bulk, and the Gildan 200's are perfect for Tie-Dye. They take the dye well and remain color-fast for the life of the shirt. Our customers are picky, and they are never disappointed in the quality of these. There IS a lower priced Gildan shirt, but they usually arrive with more sizing and preservative, which doesn't allow for good dye absorption, so if you need a perfect dyeable, go to the G200's. ~Deb Thurston, Heavenly Daze Tie-Dye

I used these shirts to customize for a senior care business & they absolutely loved them! The HTV worked perfectly on them! I order at least once a week from Jiffy!

These tees are sooooo perfect for sublimation. They aren’t silky like a drifit tee, but super soft and cotton feely. I DEFIANTLY recommend this brand of tee if you want a bright image printed

Great T. Very soft and holds size wash after wash. Crew neck keeps shape and stays flat.