anvil 65% poly

I love these shirts for sublimation. They are super soft and take sublimation ink very well. The white is not as see through as other whites ones I have seen. Great shirt if you are looking for a reasonable value for sublimation. They run pretty true to size. I use black ink on the white, demin, green, ash, sage, silver and even the paprika. Works great.

These are the best shirts! I bleach, sub and vinyl these shirts and they are up for any challenge I can dream up for them. All of my customers love the softness and durability of these shirts. This is my go to shirt for any project!

I used these shirts for sublimation, and they turned out great. They are very soft and my customer's love them.

I typically order the bella 3001C but wanted to try sublimation so looked for shirts with more polyester. These shirts worked great for both HTV and sublimation. Will definitely buy again.

I really like the feel of this shirt. The only reason I am not giving a 5 star review is because I think they run a little small for a men's shirt. I use these for sublimation,and they take the print really well. I would love to see more colors.

I absolutely love this shirt! It is so soft and not too heavy! Perfect for HTV and my customers love it! They love the Next Level Raglans and sometimes they just want a regular tee and this is the one I always recommend! I think this shirt runs true to size across the top but if you have any extra love through the middle it does fit a little tighter through the middle. I am an XL in a regular Gildan t-shirt so I bought a XL in this shirt and it fits just a little more snug than my Gildan t-shirts do through my mid section. But...I have extra love, LOL!

Great product as always! Great feel and wash up well. Take HTV well. Fit great. For me if wanting a fitted feel stay at normal sizing, for loose feel go up 1 size. For women I suggest sizing down 1 size from your normal size, for a fitted look size down 2 sizes from your normal size. Super soft!

Always use the Gildan softstyle but most colors are out, so gave these a try. I love them! They’re super soft and perfect for bleaching. I used the charcoal, was a bit scared it would be orange-like, but nope. Came out that white look I was hoping for. *I sprayed outside on a sunny day* Definitely my go to shirts from now on.

I love the marbled colors! They are so soft and lightweight. They take HTV very well. However I do not like the acid wash! I ordered the same size in each and the acid was was like a totally different shirt! It was very long-- I could have worn it as a dress if it wasn't totally see through. I definitely DO recommend the marbled and DO NOT recommend the acid wash!

These are becomingy new go to for sublimation. Clients like them and they produce a nice image. The silver is more of a grey/beige color.

Perfect for sublimation!

I used this shirt for part of my new t-shrit line for my etsy shop. I heat pressed it and it sealed perfectly! It's a very thin fabric, but surprisingly i don't have any issues with it being see through, which is usually an issue with white shirts. In my experience it runs a bit big but if you want a looser fit then it's perfect. (for instance, I wear a medium and this fits almost like a large)
My only "complaint" is that it is a little short, i think but it's not a deal breaker. ;)
Definitely will purchase again!

I used this shirt for a sublimation and it turned out perfect! Only thing negative i have to say is that it left burn lines where my heat press was, but I plan to figure out what temperature i need it at for this shirt so i don’t have lines anymore. The shirt is super soft and comfortable! I would order a size up for men just to be safe. My boyfriend normally wears a medium and he put the shirt on and it was tight around the shoulder areas.

These are one of my favorite shirts to sublimate on!

What more could I say. Great athletic fit, tight on the arms to show off the gun show and little looser around the mid section not a schmedium style gym douche look.

I bought the ash colored shirt and it was perfect, it is more brown than grey though. Took my sublimation image perfectly and all my customers were satisfied!

This tee is very soft! I had a customer order black, neon blue, neon pink, red, and team purple. They took HTV great; no burn marks (Siser Easyweed, 280F, 15 sec). I included a picture of the team purple to show how nice it looks with Sky Blue and Lime HTV! (picture is cropped funny because it was too big to upload)

This Bella canvas tee is super soft & takes very well with heat transfer vinyl when applied. I also, prefer to use with my sublimation transfers as they have a higher poly count in them, which makes for a great color transfer.

I'm a screen printer, so I can tell you there is nothing softer, people LOVE this shirt. It can have a little attitude when placing it on the platen, but that can be managed and has no bearing on the end user. Keep it up, Next Level!

This shirt has become one of my favorites for sublimation! Super soft too! Pictured is the stonewash denim color.